Products > Astec > Horizontal Directional Drills > Astec DD-6

DD-6 Specifications

Engine

  • Engine Deere 6068TF250B turbodiesel
  • Rating 188 hp (140 kW) gross
  • 166 hp (123.8 kW) continuous duty
  • Fuel capacity 40 U.S. gallons (150 L)

Rotary Drive

  • Rotary system Pinion and gear drive
  • Infinitely variable torque
  • Rotary (high torque) 10,000 ft-lb (13,558 Nm) @ 0-50 rpm
  • Rotary (low torque) 4,500 ft-lb (6,101 Nm) @ 0-110 rpm
  • Max. rotary speed 110 rpm
  • Mud flow rate Up to 250 U.S. gallons/minute (945 L/min)@1,500 psi (103 bar)
  • Fluid course 2" (50 mm)
  • Other features: Rear mounted mud swivel, 2" (50 mm) internal diameter, drive brake,
    floating carriage, digital tachometer,wireline commutator, adjustable torque limiter

 

Carriage Drive

  • Max. thrust/pullback 60,000 lb (266.9 kN) low range
  • Carriage system Rack and pinion, four pinion drive, with adjustable force limiter
  • Carriage speed (HI) 65 ft/min (19.2 m/min)
  • Carriage speed (LO) 32 ft/min (9.8 m/min)

On Board Crane (optional)

  • 6,000 lb (2,722 kg) rated capacity
  • Remote control pendant
  • Boom extends hydraulically
  • Winch and slewing drive: high torque hydraulic motors
  • Anti-two block device

Drill Pipe (optional)

 

  • AA part number

01DT1516

  • Length

15 ft (4,570 mm)

  • Outside dia. (tube)

3-1/2 inch (89 mm)

  • Water course

1-3/4 inch (44 mm)

  • Tool joint O.D.

4-1/8 inch (105 mm)

  • Thread type

2-7/8 IF pin x box

 

 

Please contact Astec Underground at
9600 Corporate Park Drive | Loudon, TN 37774-5584
Phone (865) 408-2100 | Toll Free (800) 527-6020 | Fax (865) 458-8575

© 2001-2005 Astec Industries, Inc. All Rights Reserved. Legal Notice | Privacy Policy | Webmaster | Site Map