|
Features
- 30 hp 4-wheel drive
- Single seat operation
- Operator's seat pivots for operator comfort
- Flat operator's platform
- Articulated for excellent maneuverability
- Heavy duty chassis with integral trencher
- Hydrostatic propulsion system
- Easy to operate
- Single control for speed and direction
- Control layout convenient to operator
- Attachments to complete underground installations
- Trencher / plow / back fill blade combination possible
- 6 months parts and labor warranty coverage
Engine
- Deutz F2L1011 air-cooled diesel
- Low fuel consumption
- Dual stage air cleaner with dust evacuator
- Warning light for plugged filter
- 1 year engine warranty
- Lift-offside panels to allow easy access to engine
- Ether start kit a for diesel engine
Propulsion system
- Hydrostatic propulsion system has infinite speed control
- Directional from forward to reverse without clutching or
shifting
- Eliminates belts, clutches, chains, shafts, and sprockets
- Hydro pump connected to motor mounted on transmission
- Motor drives mechanical transmission connected to front
axle
- Driveshaft connects transmission to rear axle
- Dana model 44 axles have limited slip differentials to
proportion torque to wheels
- Frame oscillates 12.5 degrees to allow wheels to stay in
contact with ground in uneven terrain
- Propulsion speed is controlled by (tail) 2-lever control
- Crowd speed is controlled by (short) 2-lever control
- Hydrostatic drive provides hydro-dynamic braking feature
- Tires available: 26x12x12. 8pr heavy duty
Brakes
- Hydro-dynamic braking occurs while engine is running
- Emergency / parking brake is hand actuated over-center
design
- Brake exceeds SAE qualifications for an emergency brake
- Disc brake is located and protected within chassis
- Disc and caliper brake are mounted on driveshaft
Steering system
- Articulated steering provides excellent maneuverability
- 22 degree articulation provides a 114" OD circle
- Steering is controlled using 2-lever control on lefthand
console
- Front and rear wheels follow same track
- Trencher does not under-cut trench in turns
Hydraulic system
- Tandem hydraulic gear pump belt driven off engine
- One section for steering and attachment lift flow
- Other section provides flow to attachment circuit
- 14 gpm flow to backhoe, hydraulic pto, hydrabore, or plow
- Hydraulic controls are located within easy reach of
operator
- Backfill blade control is located on right hand console
- Hydraulic oil cooler maintains optimum operating
temperature
- Hydraulic filters (2) to purify oil during operation
- Hydraulic PTO to power hand tools or other hydraulic
equipment
Electrical system
- 12 volt system
- 35 amp alternator
- Warning lights and analog gauges to monitor systems
- Neutral – start switch on propulsion linkage for safety
- Seat interlock system
Attachment options
- Trencher attachment is an integral part of front chassis
- Weight of engine stabilizes trencher while digging
- Shock loads from trenching are away from operator's seat
- Trencher driven mechanically through over-center locking
clutch to protect drive components from shock loads
- Power-band belt transmits engine torque positively to
clutch
- Uni-boom design can be set up easily as sprocket or
channel boom
- Trench boom lengths to attain 3, 4, and 5' dig depth
- Heavy duty booms with iarge end rollers are also available
- Cutting width set – ups to trench 6 to 14" ditches
- Standard & anti-backflex chains are available in 50k
and 75k
- Cup teeth, rock and frost, mixed cutters and h-plate with
rock and frost are available
- Grease cylinder on boom-end makes adjusting chain tension
easy
- Split-sprocket on chain drive makes replacement very easy
- Mechanical crumber attachment option available
- Spoil is delivered to lefthand side by open-end (18" dia)
auger
P60 Vibratory cable plow
- Capable of installations 24" deep
- Mounted on center and has free swing to trail unit - pin
to lock in transport position
- Isolation mounts on plow links reduce vibration
transmission into machine
- Maximum blade vibration 2000 vibrations per minute
- Vibration generated by counter-rotating weights inside
gearbox
- Plow has hydraulic lift and down pressure to maintain
blade depth
- Plow skid shoes reduce restoration requirements
- Blade mounted with two pins for easy installation
- Blades with fixed or floating chutes are available
- Also blades with bullets for pulling in semi-rigid materials
- Console includes plow controls and cooler to maintain
proper oil temperature
Heavy duty 4-way backfill blade attachment
- Controls for lilt and angle left / right on righthand
console
- Blade lift height (10") allows 25 degree approach angle
- Backfill blade angles 36 degrees right or left
- Blade will cut 4" below grade
- Blade off-sets 9.4 degrees outside edge of tire when
angled
- Blade has weld – on replaceable cutting edge
SD 100 backhoe equipped with 2-lever wobble stick
controls
- Operate backhoe while seated rearward in operator's seat and within easy reach of other machine controls
- Rear mounted backhoe with digging depth to 80" and 112" reach
- Backfill blade stabilizes machine when using backhoe
- Transport links hold boom in transport position when not
in use
- Standard trenching and bellhole buckets are available in
12, 16, 20, and 24 inch bucket widths with replaceable digging teeth
- Quick 4-bolt mounting to install
Hydrabore for horizontal boring under obstructions
- Hydraulic drive into gear reduction box
- Stem rotation (272 rpm) is bidirectional (268 ft lbs
torque)
- Positioned to bore forward or rearward of machine
- Mounting positions hydrabore in transport or operating
position
- Drill stems (10' length) and variety of bits / compactors / reamers to bore up to 12" diameter holes
- Guide posts and level guide are available for safe
operation
- Water pump available to pump fluid through drill stem
- Hydraborer application starter kit available
|
