|
Drilling Fluid System
|
Astec MCM-4000 |
|
REDUCES VOLUME OF SOLIDS |
The 160 horsepower engine of the MCM-4000 will handle up to 560 gpm (2120 L / min). This is suitable for drills with a mud pump output of 200 to 250 gpm.
Screens possess two linear motion shakers (46 x 55 inch) driven by an electric motor and with a fold-down discharge chute for cuttings. Various screen mesh sizes are available.
Options consist of a trash pump, a wash down system, and a tandem dual axle tag trailer.
- MANUFACTURED BY the world's most experienced builder of large directional drills
- RECLAIMS BENTONITE to minimize use
- MIX, CLEAN, AND TRANSFER at the same time
- REDUCES VOLUME OF SOLIDS by control of moisture content for easier disposal
- LARGE TANKS - 1,333 U.S. gallon screen (dirty) tank, 2,667 U.S. gallon clean fluid/mixing tank
- SIX KVA AUXILIARY POWER with 2 duplex outlets with GFI
- COMPACT SIZE for easier transportation, smaller jobsite foot print
- PROCESS UP TO 560 U.S. gallons/minute
- ON BOARD 90 kW GENERATOR SET to power screen shaker, pump motors, and lights
- TWO TANDOM LINEARSCREEN shakers, electric motor driven, are more efficient and require less maintenance than orbital type
- MUD JET AGITATION SYSTEM
- CENTRIFUGAL circulating pump
- SEVEN 5-INCH DESILTER CONES with individual shut off valves
- OPTIONAL TRASH PUMP, electric driven
- SKID MOUNT is standard, trailer optional
|
