|
POWER UNIT
Caterpillar® model C-27 turbo charged and after-cooled diesel engine, rated 800 hp (597 kW) @ 2,100 rpm. Two-stage air cleaner assembly; 24 volt electric start; cooling system for 125 degree (58ºC) ambient temperature operation; muffler and tachometer.
FUEL CAPACITY
Dual tanks, 520 gallon (1968 L) capacity.
Twin fuel filters and cab mounted fuel gauge.
Approx. 38 gallons (146 L) per hour fuel consumption at maximum load.
HYDRAULIC RESERVOIR
330 gallon (1,250 L) capacity.
CONVEYOR
Arc type hydraulically driven 42" (107cm) wide center-guided belt, infinitely variable in speeds from 0 to 980 fpm (300 m/min) in either direction. Hydraulically transversely shiftable for precise spoil placement selection. End sections fold up for transport
DIGGING CHAIN DRIVE
The 11.2" (28.4cm) headshaft is driven from both sides by a roller chain arrangement directly behind a heavy duty Caterpillar® differential, which is powered by an Allison® power shift transmission with integral 3-element torque converter. Four digging chain speeds are available to suit varied digging conditions. Chain speeds: 1st gear-231 fpm (70 m/min); 2nd gear-317 fpm (97 m/min); 3rd gear-411 fpm 125 m/min); 4th gear-536 fpm (163 m/min). All shafts, chains and bearings are designed to accommodate the full output of the torque converter and transmission in the stall condition (approx. 2.3 times normal operation torque). Roller chain tension is adjustable for both stages with eccentric hubs. All drive chains and sprockets are fully enclosed and oil bath lubricated.
DIGGING CHAIN
Caterpillar style D-7 size digging chain for triple chain and D-8 size for single and double chain applications. Boom furnished with hydro-adjusters to maintain proper chain adjustment. Rectangular steel cutter bar plates of varying widths and thicknesses to which tooth holders are welded to accept rotating, conical, carbide-tipped digging teeth. Plates are bolted to digging chain.>48" (122cm) diameter tailwheels with heavy-duty seals and bearings.Boom equipped with replaceable, abrasive-resistant wear plates on top and bottom.
COUNTERWEIGHT
Hydraulically extendable front counterweight helps maintain balance of machine while tramming or hoisting. Extends up to 56 inches (142 cm) for increased stability.
CRAWLERS
Caterpillar type D-8 size components with 32" (81cm) low profile double grouser shoes. Track adjusters are Caterpillar type with recoil spring for constant tension. Crawler rollers are oil filled and sealed. Each crawler assembly is removable to facilitate transport, and can be mounted in one of two positions to help balance the machine with various boom options.
CRAWLER DRIVE AND STEERING
Infinitely variable hydrostatic/mechanical system for speeds from 0 to 1 mph (1.6 km/h). Separate hydrostatic transmission for each track with electric over hydraulic steering controls and heavy-duty planetary gearbox direct coupled to track drive sprocket. Tracks may be counter-rotated for excellent maneuverability.
OPERATOR’S CAB
Fully enclosed, pressurized with climate control. All machine controls within easy reach of the operator. Elevates hydraulically 44 inches (112cm) for increased operator visibility. Located on left hand side of the machine.
DIGGING BOOM
Four sizes of boom equipped depending on digging width selections:
• 14" through 18" (36 - 46cm): single chain arrangement
• 24" through 42" (46 - 107cm): double chain arrangement
• 32" through 48" (81 - 122cm): double chain arrangement
• 48" through 60" (122 - 152cm): double or triple chain arrangement
DIGGING CAPACITY
Trench depths: 8', through 25' (2.44m through 7.65m).
Trench widths: 14" - 60" (4.26 - 18.3cm). Maximums are 48" (122 cm) wide through 25' (7.6m) depth and 60" (152cm) wide through 20' (6.1m) depth.
OPTIONAL AND EXTRA EQUIPMENT
8', through 25' (2.44m through 7.65m). 14" - 60" (4.26 - 18.3cm). Maximums are 48" (122 cm) wide through 25' (7.6m) depth and 60" (152cm) wide through 20' (6.1m) depth.
• Hydraulic fold-up crumber • Automatic laser control for grade • Automatic stringline control for grade and/or steering • RoadMiner® attachment • Various types and widths of track pads • Berm scrapers * Additional hoist capacity • Air compressor and lube equipment • Additional boom weight • Top rollers on boom
APPROXIMATE WEIGHT
215,000 - 250,000 lbs. (97,610 - 113,500 kg)
|
